How To Clean Resmed Auto Cpap Machine S10 

 

Cleaning your ResMed AirSense 10 Auto CPAP machine is an important step to ensure that your machine works properly and provides effective therapy for sleep apnea. In this article, we will discuss the steps involved in cleaning a ResMed AirSense 10 Auto CPAP machine.

1.      Disconnect the Machine

Before starting the cleaning process, make sure to unplug the machine from the power source. This will ensure your safety while cleaning the machine.

2.      Disassemble the Machine

The ResMed AirSense 10 Auto CPAP machine has several components that need to be disassembled before cleaning. These components include the mask, humidifier, air tubing, and water chamber. Here's how to disassemble the machine:

·         Remove the mask and headgear from the machine.

·         Detach the air tubing from the mask and the machine.

·         Remove the humidifier from the machine by sliding it out of the cradle.

·         Open the water chamber and remove the water.

3.      Cleaning the Mask, Headgear, and Air Tubing

The mask, headgear, and air tubing require regular cleaning to prevent bacteria and mold buildup. Here's how to clean these parts:

·         Wash the mask and headgear in warm water with mild soap.

·         Rinse them thoroughly and allow them to air dry.

·         Clean the air tubing by soaking it in warm water with a mild soap solution for 10-15 minutes.

·         Rinse it thoroughly and allow it to air dry.

4.      Cleaning the Humidifier

The humidifier adds moisture to the air, which helps prevent dryness and irritation in the airway. Here's how to clean the humidifier:

·         Empty the water chamber and rinse it with warm water.

·         Fill the chamber with a solution of equal parts white vinegar and water.

·         Let the solution sit for 30 minutes.

·         Rinse the chamber thoroughly with water and allow it to air dry.

5.      Cleaning the Machine

After cleaning the mask, headgear, air tubing, and humidifier, it's time to clean the machine. Here's how to clean the machine:

·         Wipe the outside of the machine with a damp cloth.

·         Use a small brush to clean the air inlet filter and replace it if necessary.

·         Use a damp cloth to clean the LCD screen and buttons.

·         Use a dry cloth to wipe the machine and allow it to air dry.

6.      Reassemble the Machine

After cleaning all the parts of the machine, it's time to reassemble it. Here's how to do it:

·         Fill the humidifier chamber with distilled water up to the maximum water level line.

·         Reattach the humidifier to the machine by sliding it back into the cradle.

·         Connect the air tubing to the humidifier and the mask.

·         Reattach the mask and headgear to the machine.

7.      Perform Regular Maintenance

In addition to cleaning the machine regularly, it's important to perform regular maintenance to ensure the machine is functioning effectively. Here are some tips:

·         Replace the air filter every one months.

·         Check the air tubing for cracks or tears and replace it if necessary.

·         Check the mask for wear and tear and replace it if necessary.

·         Check the humidifier chamber for cracks or damage and replace it if necessary.

In conclusion, cleaning and maintaining your ResMed AirSense 10 Auto CPAP machine is crucial for effective therapy for sleep apnea. By following these simple steps, you can ensure that your machine works effectively and provides you with a comfortable sleeping experience